ASTM A48 Standard Specification for Gray Iron Castings
When tensile testing gray iron castings specified by ASTM A48, most customers use machined specimens. These specimens are often referred to as a "dumbbell", "dogbone" or "button-end" specimens. They have shouldered ends that are used for gripping the specimen during testing.
When tensile testing Type A, B or C gray iron specimens (according to ASTM A48), we recommend using an Industrial Series 300LX load frame with split sleeve shouldered end specimen holders. These tensile grips were designed specifically for testing gray iron specimens and attach to the test frame with our Universal Spherical Tension Adapters (USTA). The USTA adapters provide the specimen alignment required by ASTM E8.
The single test space and dual acting actuator of the 300LX make it easy for operators to install the specimens. The split sleeve shouldered end specimen holders allow for very quick changing of test specimens. They also contain the ends of the broken specimen during failure providing an extra level of operator safety. The USTA assemblies enable the specimen to self-align during loading - easily meeting the alignment requirements of ASTM E8.
A variety of Instron extensometers can be supplied to accurately measure strain. Bluehill Materials Testing Software provides all the necessary control parameters and calculation algorithms to satisfy the requirments of ASTM A48 and ASTM E8 test standards.
Bluehill Universal Software is built from the ground-up for touch interaction and an intuitive user experience. Discover simpler and smarter testing with features such as pre-loaded test methods, QuickTest in seconds, enhanced data exporting: and Instron Connect – a new feature that provides a direct communication link to Service. Users of previous versions of software such as Bluehill 2 and Bluehill 3 can easily upgrade to the newest version of Bluehill.
- 3.9 MB
Universal materials testing software for static hydraulic, electromechanical and torsion testing systems - WB1154B
- 1.0 MB