Constant 90° Angle Peel Fixture.
2820-035 | 90 Degree Angle Peel Fixture
ASTM B571, D429 Method B, D2861, D3330 Method F, D6252, D6862.
Lower connection: Type Dm (1.25 in connection with 1/2 in clevis pin).
*Mounts to the base of Single column frames using 4 X M6 holes.
Upper fitting: Use appropriate grip.
| Accessory Height | 95 mm (3.7 in) |
|---|---|
| Accessory Width | 150 mm (4.9 in) |
| Capacity | 1 kN (225 lbf) |
| Description | Constant 90° Angle Peel Fixture. |
| Lower Fitting | 1/2 inch Clevis Pin (Type Dm) |
| Specimen Length | 250 mm (9.8 in) |
| Specimen Width | 120 mm (4.7 in) |
| Temperature Rating | +10 to +40°C (+50 to +100°F) |
| Testing Standards | ASTM B571, D429 Method B, D2861, D3330 Method F, D6252, D6862 |
| Upper Fitting | Use appropriate grip |
90 Degree and Variable Angle Peel Fixture
Peel fixtures provide a condition of use to measure the bond strength between laminated surface coatings, films, packaging, and their rigid backings, as well as other bonded structures.
- Products
- 10/10/2018
- 0.6 MB
2820-035 and 2820-036 Peel Test Fixtures - Equipment Reference
Instron’s 90° Peel Test Fixture (Model 2820-035) and the Variable Angle Peel Test Fixture (Model 2820-036) are testing devices designed to measure the force required to peel a sample from its backing material or substrate. This guide provides instructions on how to use your components and other frequently performed operating tasks. This manual covers specifications, installation, operations and maintenance.
- Manuals
- 8/6/2020
- 2.3 MB