ASTM D1335 Tuft Bind of Pile Yarn Floor Coverings
ASTM D1335-12 is used to measure the force required to pull a tuft from a pile flooring sample. Tuft bind testing of artificial turf surfaces is very important when quality testing manufactured product to ensure that the artificial turf passes industry standards for durability.
- Gripping tufts
- Fixtures in accordance with the standard
- Gripping tufts – The tufts are often short and difficult to maneuver into the grips or fixture. To ease the process of gripping, we recommend an upper grip or fixture that is easily removable. Hemostats fixed to the upper grip via a hook have proven to work very well. Advanced side acting grips or pneumatic side acting grips can be used to grip the hook or hemostat directly.
- Fixtures in accordance with the standard – A specimen holder must be fixed to the lower grip or base of the machine. For this test, we constructed our specimen holder using 2-inch diameter PVC pipe, which we prepared according to the requirements of the standard. We made a 2x2-inch cutout so that the backing material opposite to the tuft being tested would not come into contact with the surface of the tube. We wrapped an 8x6-inch specimen around the circumference of the pipe, aligning the cutout directly below the tuft being tested. We then gripped tufts using hemostats, as mentioned previously.
It is important to review ASTM D1335-12 in order to fully understand the test setup, procedure, and results requirements.
Instron 3300 Series Universal Testing Systems for Tensile, Compression, Bend, and other material property tests.
- 2.2 MB
5900 Universal Testing Systems are engineered for precision, built for durability, and offer the flexibility for changing requirements. They are designed with standard and optional features that increase testing efficiency and improve the testing experience for the operator. A wide range of models are available for testing capacities from < 100N up to 600kN.
- 6.8 MB
Instron® 2712-04x Series Pneumatic grips, packed with features to enhance gripping performance, usability, and operator safety.
- 1.1 MB
Screw side-action grips provide a very simple and efficient method for holding test specimens in a wide range of applications. The dual - acting design of 2710-100 series grips means that jaw faces can be adjusted to accommodate different specimen thicknesses. This ensures that the line of tensile force remains concentric with the grip body. They can be equipped with a selection of interchangeable grip jaw faces in various sizes and choice of surfaces including smooth ground, rubber-coated and serrated. Line contact and special coated faces are also available.The unique ‘snap-on’ jaw face attachment makes changing faces extremely quick and simple.
- 1.3 MB