Servohydraulic Maintenance

The 4-part Servohydraulic Maintenance Program - preventive maintenance, laboratory oil analysis, scheduled maintenance, and refurbishment - ensures accurate test results, optimum performance, safety, and a long system life.

  • Services
  • 9/12/2013
  • 368.5 KB

Composites Research at University

A leading UK University, focusing on composites testing, partners with Instron for the perfect strain measurement solution.

  • Case Studies
  • 9/11/2014
  • 41.4 KB

Accessories Newsetter July 2008 - Issue 17

Enhance Your Bluehill® and WaveMatrix™ Software Systems With New Modules

  • Newsletter
  • 9/11/2008
  • 98.5 KB

High-Temperature Extensometer CP118412 CP117668 CP118413

The Instron® range of High-Temperature Extensometers are ideally suited for testing materials such as advanced composites, metals, and polymers at elevated temperatures. This series incorporates a capacitive sensor that does not require any cooling. The extensometers are supplied with a special sensor conditioner unit providing a 0-10 output with exceptionally low noise. These extensometers can be attached to round and flat specimens to perform tensile, compression, and cyclic tests.

  • Products
  • 8/7/2015
  • 0.6 MB

IQOQ Validation and Documentation (FDA 21 CFR 820)

Instron® Professional Services have provided onsite validation and documentation services to support Installation Qualification/OperationalQualification (IQ/OQ) validation for many years. This service, provided by the original equipment manufacturer, is designed to ensure that your Instron testing equipment is suitable for its intended purpose and is capable of producing valid results (per FDA 21 CFR 820.72). Additionally, you save time and resources by using Instron Professional Services to complete the IQ/OQ validation testing. Our experienced service team will use Instrons proven documentation pack that is tailored to your individual needs and contains necessary IQ/OQ documents, calculation work sheets,and manuals.

  • Services
  • 8/7/2012
  • 286.5 KB

2713-002 Self Tightenting 5kN Rubber Grips - Operating and Installation Manual

This guide provides general instructions on how to use your component. This manual also includes specifications for the component as well as drawings.

  • Manual
  • 8/6/2020
  • 366.1 KB

2701-065 Pneumatic Grip Control - Reference Manual

The 2701 Series Pneumatic Grip Control is a unit that operates pneumatic action grips.This guide provides instructions on how to use your component and other frequently performed operating tasks. This manual covers specifications, installation, operations and maintenance.

  • Manual
  • 8/6/2020
  • 1.4 MB

2701-004 Pneumatic Footswitch - Operator’s Guide

The pneumatic foot switch is designed to provide sequential grip actuation, keeping the operator’s hands free to align the test specimen in the grips. This guide provides instructions on how to use your component and other frequently performed operating tasks. This manual covers specifications, installation, operations and maintenance.

  • Manual
  • 8/6/2020
  • 188.4 KB

2820-035 and 2820-036 Peel Test Fixtures - Equipment Reference

Instron’s 90° Peel Test Fixture (Model 2820-035) and the Variable Angle Peel Test Fixture (Model 2820-036) are testing devices designed to measure the force required to peel a sample from its backing material or substrate. This guide provides instructions on how to use your components and other frequently performed operating tasks. This manual covers specifications, installation, operations and maintenance.

  • Manual
  • 8/6/2020
  • 2.3 MB

Series 2712 and 2732 Pneumatic Side Action Grips - Operator’s Guide

Instron Series 2712 and 2732 pneumatic action grips are designed for material testing applications where specimens are difficult to hold in conventional screw- action grips. This guide provides instructions on how to use your components and other frequently performed operating tasks. This manual covers specifications, installation, operations and maintenance.

  • Manual
  • 8/6/2020
  • 0.8 MB