Wedge Action Grips; Rated capacity: 50 kN
2716-020 | Wedge Action Grips; Rated capacity: 50 kN
Wedge Action Grips, Capacity: 50 kN (11,250 lb, 5,000 kg)
Temperature range: -70 °C to 250 °C (-100 °F to 480 °F)
Maximum specimen size is face determined
Upper and lower fittings: Type Dm (1.25 in connection with 1/2 in clevis pin)
Includes a spacer that when removed, adds 5 mm to the specimen thickness range listed in the faces section, i.e. 2703-151 would be 0 to 11.4 mm specimen thickness
Requires faces
| Accessory Weight | 5.25 kg (11.6 lb ) |
|---|---|
| Capacity | 50 kN (11,250 lbf ) |
| Lower Fitting | 0.5 in clevis pin (Type Dm) |
| Temperature Rating | -73 to +250 °C (-100 to +480 °F ) |
| Upper Effective Length | 209 mm (8.2 in ) |
| Upper Fitting | 0.5 in clevis pin (Type Dm) |
- Jaw Faces for Flats (Coarse Serrated, 0 to 6.4 mm)
- Jaw Faces for Flats (Coarse Serrated, 6.4 to 12.6 mm)
- Jaw Faces for Flats (Fine Serrated, 0 to 6.4 mm)
- Jaw Faces for Flats (Fine Serrated, 6.4 to 12.6 mm)
- Jaw Faces for Flats (Rubber Coated, 0 to 6.4 mm)
- Jaw Faces for Flats (Surfalloy Coated, 0 to 6.4 mm)
- Jaw Faces for Rounds (Fine V-Serrated, 3.2 to 7.8 mm)
- Jaw Faces for Rounds (Fine V-Serrated, 7.1 to 12.5 mm)
- Jaw Faces for Flats (Surfalloy Coated, 6.4 to 12.6 mm)
2716 Series Manual Wedge Action Grips
The manual wedge action grip is designed for easy specimen loading, alignment and positioning. After initial face to specimen contact, gripping force will increase as the testing load increases. Due to Instron®'s design of moving grip bodies, virtually no preload is seen during specimen clamping. This makes them particularly suitable for testing high strength materials, such as metals and composites, ensuring that specimen slippage is eliminated.
- Products
- 6/30/2010
- 258.9 KB