Hydraulic Dual Side Acting Grips 1000kN
DuraSync® 2 Grips, Capacity 1000kN (225,000 lbf, 100,000 kgf)
Dual side-acting, hydraulic grips with patent-pending DuraSync design and semi-open back. Grips accommodate shorter specimens when using the AutoX 750 extensometer. Opposing clamping surfaces travel in a synchronized motion to provide automatic, on-center clamping of specimens. Capable of testing slightly bent or irregular specimens such as rebar or wire rod. Includes grip clamp, un-clamp and neutral controls on an ergonomic handset. Capable of Wire Strand and Thru-Zero (compressive load) Testing. Grip faces ordered separately.
Round and Flat Tensile Specimens:
- Use W-5461-x and W-5462-x jaw faces
- Minimum Specimen Length: 284 mm (11.2 in)
Wire Strand Specimens:
- Use W-5468 holders and W-5404-x Inserts
- Minimum Specimen Length: 467 mm (18.4 in)
Thru-Zero Flat and Round Specimens:
- Use W-5466-x and W-5467-x jaw faces
- Minimum Specimen Length: 284 mm (11.2 in)
Note: Minimum specimen lengths listed above are measured with zero clearance between upper and lower grips and do not account for the use of an extensometer.
Grip Specifications (each grip):
- Effective Length: 552.5 mm (21.75 in)
- Weight of Grip Body: 837 kg (1845 lbs)
Hydraulic power supplied by machine pumping unit when configured with KPX or KX load frames.
| Accessory Weight | 837 kg (1845 lb ) |
|---|---|
| Accessory Width | 902 mm (35.5 in ) |
| Capacity | 1,000 kN (225,000 lbf ) |
| Lower Effective Length | 552.5 mm (21.75 in ) |
| Lower Fitting | Bolt Flange |
| Temperature Rating | +10 to +50 °C (+50 to +120 °F ) |
| Upper Effective Length | 552.5 mm (21.75 in ) |
| Upper Fitting | Bolt Flange |
- Insert Set for Cable size 4.8 mm (0.1875 in.)
- Insert Set for Cable size 5.6mm (0.2188 in.)
- Insert Set for Cable size 6.4mm (0.25 in.)
- Insert Set for Cable size 7.1mm (0.2813 in.)
- Insert Set for Cable size 7.9mm (0.3125 in.)
- Insert Set for Cable size 9.5mm (0.375 in.)
- Insert Set for Cable size 11.1mm (0.4375 in.)
- Insert Set for Cable size 12.7mm (0.50 in.)
- Insert Set for Cable size 14.3mm (0.5625 in.)
- Insert Set for Cable size 15.2mm (0.5938 in.)
- Insert Set for Cable size 15.7mm (0.625 in.)
- Insert Set for Cable size 19.1mm (0.75 in.)
- Insert Set for Cable size 22.2mm (0.875 in.)
- Insert Set for Cable size 25.4mm (1.00 in in.)
- Jaw Faces for Flats (Serrated, 10 TPI, 0 - 60 mm)
- Jaw Faces for Flats (Serrated, 8 TPI, 60 - 120 mm)
High-capacity Hydraulic Side-acting Grips for Metals
Our new hydraulic side-action grips, with an open-front design, incorporate DuraSync technology and provides an ideal solution for high-capacity metals testing. Available in capacities from 250kN to 2000kN.
- Press Releases
- 11/14/2012
- 66.9 KB