Anti-Buckling Support and Cover Plates to SACMASRM-1
CP114215 | Anti-Buckling Support and Cover Plates
Features strain gauge cut out to SACMA SRM-1 for Compressive Modulus Test Specimen
Mounts on CP114249 Base Support (Required not included)
Max. Load : 100 kN (10,000 kgf, 22,000 lbf)
Temperature range : -100 to +350 °C (-148 to +662 °F)
Accessory Height | 73 mm (2.87 in) |
---|---|
Accessory Weight | 0.3 kg (0.66 lb) |
Accessory Width | 38.1 mm (1.5 in) |
Capacity | 100 kN (22,000 lbf) |
Lower Fitting | Requires platen 100 mm (4 in) or larger |
Temperature Rating | -100 to +350°C (-148 to +662°F) |
Testing Standards | SACMA SRM-1 |
Upper Fitting | Requires platen 100 mm (4 in) or larger |
Composites Test Fixtures- Compression Anti-Buckling
The anti-buckling fixture was originally designed for rigid plastics per ASTM D 695, reinforced plastics per ASTM D 3846. It was also extended and used for high-modulus composites. Boeing then adapted the fixture so that it would be self supported between two platens to ensure consistent perpendicularity of the fixture. The SACMA standard followed the Boeing design with an added alternative support fixture with a cutout, which would allow bonded strain gages to be used at the center of the specimen for a more precise strain measurement.
- Products
- 8/25/2014
- 0.5 MB