|
|
Peel Resistance for Adhesives, T-Peel Test (ASTM D1876)
This test method covers the determination of the comparative peel or stripping characteristics of adhesive bonds when tested on standard-sized specimens and under defined conditions of pretreatment, temperature, and testing machine speed. Typical results include "Average Load between 2 Points". This test can be performed on single column and dual column test frames.
Data Acquisition is very important in getting proper test results. We suggest choosing a system with a high enough data sampling rate to capture all the peaks and troughs of the test - otherwise you will get a lower average load result than you should. Also, ensure that the data sampling is uniform throughout the test. Another important factor is the data acquisition device's bandwidth: too low a bandwidth introduces noise into the test readings, while too high a bandwidth may "dull" the data readings resulting in missed peaks and troughs.
About This Solution
|
|
Related Literature:
Our Labs
Instron application labs are used for both research and development, as well as testing customer samples to assist in finding the right equipment.
Contact our Application Specialists to determine the solution that's best for you!
|
|