|
Dynatup® Impulse™ ...
Control for Dynatup 9250 Systems
The 9250 Series systems also feature the Impulse
Software Controller console. The Impulse console is designed to
provide intelligent test setup and control with a very flexible
interface. This controller displays real-time data while providing
access to test set-up controls.
- Displays real-time data while providing access
to test set-up controls.
- Digital displays what the current settings are
including test drop height, velocity, and impact energy.
- Automatically calculates and sets up drop height
based on desired impact velocity, energy, etc.
- Automatically measures drop mass.
- Automatic temperature chamber control.
- Specific gravity, system friction correction.
- Full flexibility to run tests directly from PC
or frame control panel.
Impulse Electronics
The Impulse Signal Conditioning Unit (ISCU) is the
most critical component of the measurement system. Instron developed
the ISCU to match the technology, performance, and versatility required
for instrumented impact testing.
- 1.25 - 5 MHz sampling rates.
- 500 Khz Bandwidth.
- High performance signal-conditioning platform
designed for use with load cells, tups, accelerometers, and other
sensors.
- Standard unit performs single or two-channel
analog signal conditioning.
- Connect to a second unit to provide up to four
input channels.
- Built-in signal amplification, isolation, and
direct transducer conditioning improves the performance and reliability
of measurement system.
|