ISO 10275:2007 - Tensile Strain Hardening Exponent
ISO 10275:2007 specifies a method for determining the tensile strain hardening exponent, commonly called the n-value, of flat metallic materials, typically sheet and strip.
To calculate the n-value a test is performed to ISO 6892 and using the axial extensometer a stress strain curve is produced. The n-value is calculated over the whole uniform plastic strain range. This is typically from the begining of uniform strain hardening region, after any yield point phenomena, up until just before the point at which tensile strength is calculated, Rm. These calculations can be done automatically using Bluehill (not lite) or Partner software.
An ISO 10275 test is typically performed at the same times as ISO 10113, plastic strain ratio.
The 2630-100 series of extensometers offers speed of attachment and ease-of-use. The light-weight, rugged cross-brace design eliminates errors caused by physical distortion, while built-in protection ensures that damage is not caused by over-extension. The low operating-force arms of the extensometer reduce the possibility of knife-edge slippage when testing hard or smooth surfaced materials.
- 0.5 MB
The second generation Advanced Video Extensometer (AVE 2) utilizes patented measurement technology in the fastest, most accurate non-contacting strain measurement device commercially available. The device dramatically reduces errors from thermal and lighting variations that are common in most labs. It can easily be adapted to nearly every testing system in your lab.
- 1.3 MB
The AutoX 750 is a high-resolution, long-travel automatic contacting extensometer. It can be mounted onto any electromechanical 3300, 5500, or 5900 table top and floor model systems, as well as LX, DX, HDX, and KN static hydraulic testing systems. It is well suited for applications involving plastics, metals, biomedical, composites, elastomers, and more. The AutoX has a maximum travel of 750 mm and accuracy of ± 1 µm.
- 1.4 MB
Bluehill Universal Software is built from the ground-up for touch interaction and an intuitive user experience. Discover simpler and smarter testing with features such as pre-loaded test methods, QuickTest in seconds, enhanced data exporting: and Instron Connect – a new feature that provides a direct communication link to Service. Users of previous versions of software such as Bluehill 2 and Bluehill 3 can easily upgrade to the newest version of Bluehill.
- 1.4 MB
5900 Universal Testing Systems are engineered for precision, built for durability, and offer the flexibility for changing requirements. They are designed with standard and optional features that increase testing efficiency and improve the testing experience for the operator. A wide range of models are available for testing capacities from < 100N up to 600kN.
- 2.8 MB