Low Force Dynamic Fatigue Testing of Tissues and Biomaterials
Many soft tissues, such as skin or collagen, are delicate specimens with low ultimate strength values. An effective testing system should be highly sensitive to low-force measurements and small displacements. Our ElectroPuls™ Test Instruments offer the precision necessary for low-force testing of tissues and biomaterials in tension, compression, flexure and fatigue.
When testing at very low loads, load cell selection is vital to ensure the appropriate measurement accuracy and control. For loads in the sub-Newton range (e.g. down to 1 gram) an ultra-low capacity load cell can be used. In this particular case, we used a 1 N (100 gram) load cell in conjunction with the ElectroPuls E1000.
As well as correct load cell selection, the gripping system must be easy to use, lightweight and with adjustable gripping force to help prevent damage to delicate specimens. In the case of fiber test grips, the grips can be opened and closed in a controlled manner with the lightest touch. A specialized tension system is also used to set the correct gripping force. Careful component and material selection has resulted in a lightweight design that can be used in conjunction with the ultra low force load cell.
With the versatile design of ElectroPuls, it can be used to apply loads at more than 1000 N, as well as the sub-Newton loads required in this particular test. Such flexibility is only achieved by advanced algorithms that control the position of the ElectroPuls actuator. Using more advanced control features, such as Tri-Modal control found with the controller, load peak control is also possible.
ElectroPuls™ Electrodynamic Test Instruments
ElectroPuls instruments are state-of-the-art electrodynamic test systems for dynamic and static tests on materials & components. Powered entirely from a single-phase mains supply, they feature the latest in testing technology and a host of other user-oriented features.
- Products
- 4/24/2013
- 1.7 MB
Dynacell
Bringing a dynamic dimension to force measurement
- Products
- 3/6/2017
- 1.0 MB
ElectroPuls™ E1000 All-Electric Dynamic Test Instrument
The ElectroPulsTM E1000 is a state-of-the-art, all-electric test instrument designed for dynamic and static testing on a wide range of materials and components. It includes Instron® advanced digital control electronics, DynacellTM load cell, Console software, and the very latest in testing technology – hassle-free tuning based on specimen stiffness, electrically operated crosshead lifts, a T-slot table for flexible test set ups, and a host of other user-orientated features. Powered from a single-phase supply it requires no additional utilities for basic machine operation (for example, pneumatic air, hydraulics, or water).
- Products
- 3/3/2017
- 0.7 MB
ElectroPuls™ E3000 All-Electric Dynamic Test Instrument
The ElectroPulsTM E3000 is a state-of-the-art, all-electric test instrument designed for dynamic and static testing on a wide range of materials and components. It includes Instron® advanced digital control electronics, DynacellTM load cell, Console software, and the very latest in testing technology–hassle-free tuning based on specimen stiffness, electrically operated crosshead lifts, a T-slot table for flexible test set ups and a host of other user-orientated features. Powered from a single-phase supply it requires no additional utilities for basic machine operation (for example, pneumatic air, hydraulics, or water).
- Products
- 3/3/2017
- 0.7 MB
ElectroPuls™ Controller, Console and Software
The ElectroPuls tower contains the control electronics and the power amplifier required to run the ElectroPuls system. Built on Instron’s 8800 family of advanced controllers, the ElectroPuls controller is a hardware and firmware based device. The controller is connected to the PC via a high-speed industry-standard GPIB interface and is expandable to accommodate additional data acquisition channels.
- Products
- 7/30/2009
- 1.8 MB