Instron Used Equipment

Catalog#  Description Qty
 


 




Contact us
Catalog#  Description  Qty 
2501-094  Tension Coupling, Type Om (12 mm connection with 6 mm clevis pin) to Cf (5/8 in connection with 1/4 in clevis pin). Capacity: 2 kN.  1
2501-157  Tension Coupling, Type OOm (6 mm connection with 2.6 mm clevis pin) to Cf (5/8 in connection with 1/4 in clevis pin).  1
2501-351  Adaptor set for 2713-006 grips to Instron machines. Includes two Type Om, one Type Dm Adapters.  1
8005-042  Attachment Kit. Type IIm LH (M48X2) to IIm RH (M48X2). Includes Wedge Washers.  2


Contact us
Catalog#  Description Qty
LCR-UEX-2630-101  Strain Gauge Extensometer, 10 mm gauge length, +/-10% maximum.  2
LCR-UEX-2630-105  25 mm gauge length, +/-10% travel (Static).  5
LCR-UEX-2630-107  25mm gauge length 100% travel (Static).  1
LCR-UEX-2630-108  1in gauge length, 10% travel (Static).  1
LCR-UEX-2630-109  Strain Gauge Extensometer, 1 in gauge length, +50%, -10% travel (Static). 1
LCR-UEX-2630-110  Strain Gauge Extensometer, 1 in gauge length, +100%, -10% travel (Static).  2

Contact Us
Catalog#  Description Qty
2702-004  Smooth faces. 1 x 1 inch Used with grips 2712-002, 2732-001, 2710-001 B Style  1
2702-021 Faces, Smooth Ground. 25 mm wide x 50 mm high (1 x 2 in.). Set of 4 faces.
For 2710-003, 105, 106 Screw Side Action Grips and 2712-005 Pneumatic
Hydraulic Grips (discontinued).
 3
2702-023

Faces, Serrated. 25 mm wide x 50 mm high (1 x 2 in.)
Set of 4 faces.
For 2710-003, 105, 106 Screw Side Action Grips and 2712-005 Pneumatic

2702-024 Faces, Smooth Ground. 50 mm wide x 50 mm high (2 x 2 in.). Set of 4 faces.           
For 2710-003, 105, 106 Screw Side Action Grips and 2712-005 Pneumatic
Hydraulic Grips (discontinued).
 1
2702-027 Faces, Smooth Ground. 75 mm wide x 50 mm high (3 x 2 in). Set of 4 faces.
For 2710-003, 105, 106 Screw Side Action Grips and 2712-005 Pneumatic
 Hydraulic Grips (discontinued).
 5
2702-031 

Faces, Smooth Ground. 25 mm wide x 25 mm high (1 x 1 in.) . Set of 4 faces.
For 2710-002, 103, 104, 2712-003, 004, 015, 016, 018, 020, and 2732-003, 004, 008, 009 Pneumatic Side Action Grips, and Screw Side Action Grips. 

1
2702-033  Faces, Serrated. 25 mm wide x 25 mm high (1 x 1 in.) Set of 4 faces.
For 2710-002, 103, 104, 2712-003, 004, 015, 016, 018, 020, and 2732-003, 004, 008, 009 Pneumatic Side Action Grips, and Screw Side Action Grips. 
1
2702-034  Faces, Smooth Ground. 75 mm wide x 25 mm high (3 x 1 in.)
For 2712-003, 2732-003, 2712-004, 2732-004, 2712-015, 2712-016 Pneumatic Side Action Grips, and 2710-002, S1-15455 Screw Action Grips. Set of 4 faces.
1
2702-037 Faces, Smooth Ground. 25 mm wide x 25 mm high (1 x 1 in.). Set of 4 faces.
For 2710-003, 105, 106 Screw Side Action Grips and 2712-005 Pneumatic Hydraulic Grips (discontinued).
 3
2702-039  Faces, Smooth Ground. 75 mm wide x 25 mm high (3 x 1 in.). Set of 4 faces.
For 2710-003, 105, 106 Screw Side Action Grips and 2712-005 Pneumatic
Hydraulic Grips (discontinued).
 5
2702-042  Hi temp faces. 1 x 1 inch. Used with grips 2712-002, 2732-001, 2710-001 B Style
2
2702-044  High Temperature Brake Lining Faces. 25 mm wide x 38 mm high (1 x 1-1/2
in.). Set of 4 faces.
Temperature Range: 100 °F to 450 °F.
For 2710-002, 103, 104, 2712-003, 004, 015, 016, 018, 020, and 2732-003, 004, 008, 009
Pneumatic Side Action Grips, and Screw Side Action Grips.
 1
2702-059  Faces, Serrated. 75 mm wide x 25 mm high (3 x 1 in.)
Set of 4 faces.
For 2710-002, 103, 104, 2712-003, 004, 015, 016, 018, 020, and 2732-003, 004, 008, 009
Pneumatic Side Action Grips, and Screw Side Action Grips.
 1
2702-106  Faces, Smooth Ground. 25 mm x 25 mm (1 x 1 in). Specimen thickness: 0 - 20 mm. For 2712-017 Pneumatic Side Action Grips and 2712-012 Pneumatic Side Action Grips. Set of four faces.  1
2702-125  Faces, V-Serrated. 25 mm wide x 25 mm high (1 in x 1 in) Specimen diameter: 3 to 6.5 mm (0.12 to 0.25 in)
For 2710-103, -104 Screw Side-Action Grips only.
(Set of 4 faces)
 1
2702-127 Faces, V-Serrated. 25 mm wide x 25 mm high (1 in x 1 in) Specimen diameter: 3 to 6.5 mm (0.12 to 0.25 in)
For 2710-105, -106 Screw Side-Action Grips only.
(Set of 4 faces)
 4
2702-128  Faces, V-Serrated. 25 mm wide x 25 mm high (1 x 1 in.) Specimen diameter: 6 to 18.5 mm (0.24 to 0.73 in)
For 2710-105, -106 Screw Side-Action Grips only.
(Set of 4 faces)
 3
2702-130  Faces, Smooth Ground. 25 mm wide x 25 mm high (1 x 1 in). For 2710-004 Screw Action Grips. Set of four faces.  1
2702-333  aw Faces, Smooth, 38mm wide x 12mm high (1.5 x 0.5 in.)
Set of 4 faces. For 2712-04x Pneumatic Side Action and 2710-1XX Advanced
Screw Side-Action Grips.
Max. Specimen thickness :
13mm with 2712-041
20mm with 2712-042
26mm with 2712-045/-046
36mm with 2710-113/-114
46mm with 2710-115/-116
 3
2703-071  Threaded faces. 16T per inch 16mm to 19mm(0.625 to 0.75 inch) opening Used with grips 2716-002, 2736-002. 1
2703-171  Serrated faces. 25mm Use with grips 2716-016, 2716-017.  1
2703-366 Jaw Faces for 2716-028, Flat, Carbide Coated Specimen Thickness range 0-10 mm (0-0.39 in) 60 mm Wide x 75 mm Long (2.3 x 3.0 in) Temperature range -80 to 250 °C (-112 to 482 °F) Set of 4 faces Jaw Faces for 2716-028 Precision Wedge Grips 100 kN. 1
2703-544  Flat serrated jaw faces 100mm wide for gripping flat specimens 31-42mm thick (set of 4 faces) For use with 2742-501 grip. 
2703-555  Serrated faces. 100mm wide 25 to 32mm (1.0 to 1.25inch) opening Used with grips 2742-524.  1
W-5181-A Faces, Flat Serrated 1.25 mm pitch grooves (20 TPI), 70 mm (2.75 in) wide. Specimen Thickness: 0 - 15 mm (0 - 0.59 in). Jaw Faces for W-5180, W-5380 WEDGE GRIP bodies and 150DX-G7(A thru-D), 300DX-G7 (A thru D) crossheads
 1
W-5181-B Faces, Flat Serrated 1.25 mm pitch grooves (20 TPI), 70 mm (2.75 in) wide. Specimen Thickness: 15 - 30 mm (0.59 - 1.18 in) For W-5180, W-5380 bodies and 150DX-G7, 300DX-G7 crossheads
 1
W-5181-C Faces, Flat Serrated 1.25 mm pitch grooves (20 TPI), 70 mm (2.75 in) wide. Specimen Thickness: 30 - 45 mm (1.18 - 1.77 in)For W-5180, W-5380 bodies and 150DX-G7, 300DX-G7 crossheads  1
W-5185-B Faces, Vee Serrated 1.25 mm pitch grooves (20 TPI). Specimen Diameter: 5 - 15 mm (0.196 - 0.59 in. Jaw Faces for W-5180, W-5380 WEDGE GRIP bodies and 150DX-G7(A thru-D), 300DX-G7 (A thru D) crossheads  1
W-5185-C Faces, Flat Serrated 1.25 mm pitch grooves (20 TPI), 70 mm (2.75 in) wide. Specimen Thickness: 30 - 45 mm (1.18 - 1.77 in. Jaw Faces for W-5180, W-5380 WEDGE GRIP bodies and 150DX-G7(A thru-D), 300DX-G7 (A thru D) crossheads  1
W-5185-D Faces, Vee Serrated 2.5 mm pitch grooves (10 TPI). Specimen Diameter: 30 - 45 mm (1.18 - 1.77 in) Note: Maximum Jaw face separation fully open-front grip loading is 37 mm (1.46 in). Specimens of greater diameter require end loading. Jaw Faces for W-5180, W-5380 WEDGE GRIP bodies and 150DX-G7(A thru-D), 300DX-G7 (A thru D) crossheads
 1
































Contact Us
Catalog#  Description Qty
CP105787  Wyoming Modified Celanese Compression Fixture
Test fixture found in ASTM D 3410-1997.
Max. Static Load : 100kN (10,000 kgf, 22,000 lbf)
Maximum specimen width 12.7mm (0.5 in)
Specimen thickness (inclusive of end tabs) : 3.8 to 6.35mm
Jaw face length : 50.8mm (2 in)
High strength stainless steel with stainless steel bearing.
Temperature range : -70 to +200 °C (-94 to +392 °F)
Includes 1 set of serrated jaw faces
Upper Interface: Requires compression platen diameter 100 mm or larger. Lockable spherical seat recommended to ensure parallelism.
Lower Interface: Requires fixed compression platen diameter 100 mm (4 in) or larger.
Platens not included
 1
2505-027  Boeing Open Hole Compression Fixture. For edgewise compression of specimens providing full lateral support and accessibility to the gauge section for strain measurement. 17-4PH stainless steel construction fits between compression platens. Includes shipping and storage case.  1
PR10754-8  Die Shear fixture with 10 mm. 1 kN Capacity  1
S4683A  Sandwich Flatwise Tension Fixture to ASTM C 297 Supplied with 5 sets of aluminium loading blocks which are grit blasted and hard clear anodized. Upper fiiting and lower fittings: Type Dm (1.25 inch connection with 1/2 inch clevis pin). Max. Static Load: 30 kN (3,000 kgf, 6,600 lbf) Temperature range: -70 to +250 °C (-94 to +482 °F) Specimen size: 50 x 50 mm (2 x 2 in)  1

Contact Us
Catalog#  Description Qty
2701-004  Pneumatic Footswitch for all new and existing 3300, 4400 (except 4411), 5500, 5800, 5900 series load frames and UPDATE Retrofits (excluding 4400/5500 retrofits to 113X Series, 4500 Series, and 6000 Series). Includes a foot-operated (single pedal) switch to open and close grips, 2 air lines with quick disconnect fittings for grips and 3rd air line for air supply. Not suitable for pretension grip control. 1

Contact Us
Catalog#  Description Qty
2710-004  Screw Side Action Grips. Capacity: 500 N (100 lb, 50 kg).
Temperature range: 0 °C to 100 °C (32 °F to 212 °F). .
Maximum specimen thickness: 12.7 mm (0.5 in).
Upper and lower fittings: Type Om (12 mm connection with 6 mm clevis pin).
Includes 25 mm wide x 25 mm high (1 x 1 in) Rubber Coated Faces (2702-132).
 1
2711-001
Fiber Clamps. 5N Upper Type A Lower Type D
3
2712-041U
Pneumatic Side Action Grip. Capacity: 1 kN (100 kg, 225lb).
Temperature range: -20 °C to +100 °C (-4 °F to +212°F).
Maximum specimen thickness: 13mm (0.5 in)*
*Depends on jaw faces selected
Upper fitting: 6 mm clevis pin, male
1
2712-042  Pneumatic Side Action Grips. Capacity: 2 kN (200 kg, 450 lb,).
Temperature range: -20 °C to +100 °C (-4 °F to +212°F).
Maximum specimen thickness: 20mm (0.75 in)*
*Depends on jaw faces selected
Upper and lower fittings: 6 mm clevis pin, male.
 1
2712-045  Pneumatic Side Action Grips. Capacity: 5 kN (500 kg, 1125 lb,). Temperature range: -20 °C to +100 °C (-4 °F to +212°F). Maximum specimen thickness: 26mm (1 in)* *Depends on jaw faces selected Upper and lower fittings: 0.5 in clevis pin, male. Requires jaw faces and an Air Distribution Kit. Optional Air Control Kit with footswitch is available. 1
2713-006  Thin Film Grips. Capacity: 100 N (20 lb, 10 kg). Specimen width is 25 mm, thicknes is 0.2 mm Ambient use only. 1
2714-006  Pneumatic Cord and Yarn Grips. Capacity: 1.6 kN (350 lb, 175 kg).
Temperature range:-10 °C to 80 °C  (14 °F to 176 °F).
Maximum specimen diameter: 4.82 mm (0.19 in).
Upper and lower fittings: Type Dm (1.25 in connection with ½ in clevis pin).
Requires a rigid coupling and an Automatic Air Control Kit or Pneumatic Foot Switch
1
2714-010  Pneumatic Cord and Yarn Grips. Capacity: 5.0 kN (1,000 lb, 500 kg).
Temperature range: -10 °C to 80 °C (14 °F to 176 °F).
Maximum specimen diameter: 2 mm (0.08 in).
Upper and lower fittings: Type Dm (1.25 in connection with ½ in clevis pin).
Requires a rigid coupling and an Automatic Air Control Kit or Pneumatic Foot Switch
 
CP103444  Hydraulic Wedge Action Grips. Capacity 300 kN (67,500 lbf, 30,000 kgf) Specimen Range: - Flats: 0 - 50 mm thick (0 - 2.0 in) x 70 mm (2.75 in) wide - Rounds: 3 - 40 mm (0.118 - 1.57 in) diameter Minimum Specimen Length without the use of an extensometer is 270 mm (10.63 in) Ambient temperature use only. Upper and Lower Fittings: Type IIfRH (M48 x 2) Weight Per Grip Body 123 kg (270 lb) Grip Body Dimensions W x L x D: 445 x 302 x 127 mm (17.5 x 11.875 x 5 in) Effective Length using standard threaded mounting: Upper - 329 mm (13.0 in) Lower - 352 mm (13.8 in) Grip faces sold separately use: W-5181 & W-5185 series grip faces Notes: 1) Hydraulic hoses, manifolds and mounting hardware when purchased with a new 300LX or 300KN testing system are provided. (Select mounting options corresponding to load frame and test space option of the machine grips are to be used on. Consult IPG Business team for all other applications.) 2) Note: If integrating these grips on an LX frame, the frame must be configured with a minimum of 300 mm (1 foot) of extended height in order to accomodate calibration fixtures.  1


Contact Us
Catalog#  Description Qty
LCR-UEX-2519-106  2 kN S-Beam type load cell  2
LCR-UEX-2525-815  2.5 N Drop Through Static  1
LCR-UEX-2530-439  5 N Low Profile Static  8
LCR-ULC-2519-101  10 N S-Beam Static  15
LCR-ULC-2519-102  50 N S-Beam Static  8
LCR-ULC-2519-103  100 N S-Beam Static  16
LCR-ULC-2519-105  1 kN S-Beam Static  2
LCR-ULC-2519-107  5 kN S-Beam Static  9
LCR-ULC-2525-804  10 kN Drop Through Static  1
LCR-ULC-2525-805  5 kN Drop Through Static  1
LCR-ULC-2525-816  500 N Drop Through Static  1
LCR-ULC-2527-130  1 kN Sandwich Style Dynamic (Dynacell)  2
LCR-ULC-2527-131  250 N Sandwich Style Dynamic (Dynacell)  3
LCR-ULC-2530-405  5 kN Low Profile Static  13
LCR-ULC-2530-418  2 kN Low Profile Static  1
LCR-ULC-2530-427  100 N Low Profile Static  13
LCR-ULC-2530-428  10 N Low Profile Static  5
LCR-ULC-2530-437  50 N Low Profile Static 2
LCR-ULC-2530-443  10 kN Low Profile Static  2
LCR-ULC-2530-444  30 kN Low Profile Static  2
LCR-ULC-2530-445
50 kN Low Profile Static 1
LCR-ULC-2580-108  Static Load Cell +/-5 kN  4

Contact Us
Catalog#  Description Qty
2501-107 Compression Platen. 50 N 13 sq cm (2 sq inch) 40.6 mm (1.6 inch) diameter. Type Om connection  1
2840-112  Fatigue Rated Spherical Seat, Capacity 500 kN (110 kip) Static / 250 kN (56 kip) Dynamic. - For Use With 2840-118,-119 Or -110 Platens - Includes adaptor to M30 x 2 right hand or M48 x 2 right hand compression platen - Mechanical interface: M48 x 2 right hand female thread Quantity: 1 seat  1


Contact Us