Miniature 3 Point Bend Fixture. Rated capacity: 2 kN
2810-412 | Miniature 3 Point Bend Fixture
Complies with SEMI standard G69-0996.
Capacity 2 kN (450 lb, 200 kgf)
Temperature range: -75 °C to 250 °C (-103 °F to 482 °F)
Upper and Lower fitting: Type Om (12 mm connection with 6 mm clevis pin).
Maximum Span: 105 mm (4 in).
Maximum specimen width: 25 mm (1 in).
Anvil radius: 2.5 mm (0.1 in).
This bend fixture designed for Mode II fracture toughness testing. Incorporates a micrometer to adjust the location of the crack front and stops for repeatable specimen alignment.
The fixture fully complies with the requirements of SEMI standard G69-0996 "Test method for measurement of adhesive strength between lead frames and moulding compounds for semiconductor packages".
|Anvil Diameter||5 mm (0.196 in)|
|Capacity||2 kN (450 lbf)|
|Lower Fitting||6mm clevis pin (Type Om)|
|Specimen Width||0 - 25 mm (0 - 1 in)|
|Support Span||5 - 105 mm (0.2 - 4 in)|
|Temperature Rating||-75 +300 °C (-103°F to 572°F °F)|
|Upper Fitting||6mm clevis pin (Type Om)|
The 2810-412 miniature 3-point bend fixture is designed for Mode II fracture toughness testing. The fixture fully complies with the requirements of SEMI standard G69-0996 ‘Test method for measurement of the adhesive strength between lead frames and molding compounds for semiconductor packages’.
- 0.5 MB