"Boeing" Open Hole Compression Fixture to ASTM D6484
CP113777 | "Boeing" Open Hole Compression Fixture
Fixtures for Boeing open hole compression test to ASTM D6484 (Inch-pound units system).
Suitable for shear loading (procedure A) by mounting in hydraulic grips, and end loading (procedure B) when used with 150 mm (6 in) diameter compression platens and support plates CP113778.
Provides accessibility to the gauge section for strain measurement.
Max Load: 200KN (20,000 kgf, 45,000 lbf)
Temperature : -70° to 250° C (-94 to +482 °F)
Note: Compression platens and support plates CP113778 not included
Includes storage case.
|Accessory Height||305 mm (12 in)|
|Accessory Weight||7 kg (15 lb)|
|Accessory Width||75 mm (3 in)|
|Capacity||200 kN (45,000 lbf)|
|Lower Fitting||Requires platen 100 mm (4 in) or larger|
|Temperature Rating||-70 to +250 °C (-94 to +482 °F)|
|Testing Standards||ASTM D6484 and Boeing BSS7260|
|Upper Fitting||Requires platen 100 mm (4 in) or larger|
Composite Test Fixtures Open-Hole Compression testing is preformed on multi-directional polymer matrix composite laminates reinforced with high modulus fibers.
- 174.7 KB